Easy Ramp

Constant wattage heating mat.

Raytech Easy Ramp consists of a constant wattage heating cable assembled with tape to form a heating mat, which is easily and quickly spread on the surfaces to be protected. Easy Ramp is ideal for solving problems caused by ice formation and accumulation of snow on access ramps to garages, pathways, outdoor parking areas, footpaths, etc.

It can be installed in concrete, asphalt, and interlocking bricks, under porphyry paving, or under other paving materials blocked with cement and sand. The standard width of Easy Ramp pads is 60cm; a sufficient width to free the track of vehicle wheels from ice and snow or to create an extremely safe pedestrian pathway.

The power density developed by Easy Ramp is 300 W/m2. The mat is available in various lengths which are easily adaptable to the size of the area to track. Where the size of the mat is larger than that of the ramp, the excess part of mat can be easily folded 90 degrees.

The mat is supplied completely finished and ready for installation, complete with 4 meters of cold cable (3x1.5 mm2 or 3x2.5 mm2) for connection to the power supply. The constant wattage heating cable, which constitutes the mat, is a 2 conductor heating cable, which is shielded; this allows one end only to be powered, making installation even faster and easier.

Technical Specifications:

  • Mat specific power: 300 W/m2
  • Power supply: 230 V ~ 50/60 Hz
  • Mat thickness: 7.5 mm
  • Minimum installation temperature: + 5°C
  • Maximum working temperature: + 80°C
  • Cold cable (supply): length 4 meters - 3x1.5mm2 or 3x2.5mm2
  • Heating cable type: 2 conductors, screened cable
  • Heating cable dimensions: ~ 5x7mm
  • Heating cable power: 25W/m
  • Insulation: XLPE
  • External sheath: PVC
  • Marking: CE
Easy Ramp

POA / Each

Download Download Product Details

Refer Catalogue Page: 494

Arrow LeftGo back